diff --git a/README b/README
deleted file mode 100644
index 70580a7f..00000000
--- a/README
+++ /dev/null
@@ -1,12 +0,0 @@
- __ _ __ _ __ ___ __
- / / (_) /____ | |/_/___/ _ )___ ___ ________/ /__
- / /__/ / __/ -_)> Intro
---------
-Supported boards files (platforms/targets) for LiteX.
diff --git a/README.md b/README.md
new file mode 100644
index 00000000..a5a71b3a
--- /dev/null
+++ b/README.md
@@ -0,0 +1,143 @@
+
+ __ _ __ _ __ ___ __
+ / / (_) /____ | |/_/___/ _ )___ ___ ________/ /__
+ / /__/ / __/ -_)> Intro
+--------
+
+This repository contains the platforms/targets currently supported by LiteX:
+
+- The platform provides the defintion of the board:IOs, constraints, clocks, components + method to load and flash the bitstream to it.
+- The target provides a LiteX base design for the board that allows you to create a SoC (with or without a CPU) and integrate easily all the base components of your board: Ethernet, DRAM, PCIe, SPIFlash, SDCard, Leds, GPIOs, etc...
+
+The targets can be used as a base to build more complex or custom SoCs. They are are for example directly reused by the [Linux-on-LiteX-VexRiscv](https://github.com/litex-hub/linux-on-litex-vexriscv) project that is just using a specific configuration (Linux-capable CPU, additional peripherals). Basing your design on provided targets allow to to reduce code duplication between very various projects.
+
+First make to install LiteX correctly by following the [installation guide](https://github.com/enjoy-digital/litex/wiki/Installation).
+
+Each target provides a default configuration with a CPU, ROM, SRAM, UART, DRAM (if available), Ethernet (if available), etc... that can be simply built and loaded to the FPGA with:
+
+ $ ./target.py --build --load
+
+You can then open a terminal on the main UART of the board and interact with the LiteX BIOS:
+
+

+
+But this is just the starting point to create your own hardware! You can then:
+
+- Change the CPU: add `--cpu-type=lm32, microwatt, serv, rocket, etc... `
+- Change the Bus standard: add `--bus-standard=wishbone, axi-lite`
+- Enable components: add `--with-ethernet --with-etherbone --with-sdcard etc...`
+- Load application code to the CPU from UART/Ethernet/SDCard, etc...: https://github.com/enjoy-digital/litex/wiki/Load-Application-Code-To-CPU
+- Create a bridge with your computer to easily [access the main bus of your SoC](https://github.com/enjoy-digital/litex/wiki/Use-Host-Bridge-to-control-debug-a-SoC)
+- Add a Logic Analyzer to your SoC to easily [observe/debug your design](https://github.com/enjoy-digital/litex/wiki/Use-LiteScope-To-Debug-A-SoC)
+- Simulate your SoC and interact with it at decent speed with [LiteX Sim](https://github.com/enjoy-digital/litex/blob/master/litex/tools/litex_sim.py)/Verilator.
+- Integrate external cores/CPU in your design.
+- etc...
+
+Please use `./target.py --help` to see the pre-built various possibilities.
+
+Hoping you will find this useful and enjoy it, please contribute back if you make improvements that could be useful to others or find issues!
+
+**A question or want to get in touch? Our IRC channel is [#litex at freenode.net](https://webchat.freenode.net/?channels=litex)**
+
+> **Note:** All boards with >= 32MB of memory and enough logic can be considered as Linux Capable.
+
+
+[> Open-hardware boards
+-----------------------
+
+Fully open-hardware boards, the ECP5 and iCE40 ones are even usable with the open-source FPGA toolchains!
+
+| Name | FPGA Family | FPGA device | Sys-Clk | TTY | RAM | PCIe | Ethernet | Flash | SDCard |
+|--------------|---------------------|---------------|----------|------|---------------------|-----------|----------------|-------------|--------|
+| ECPIX-5 | Lattice ECP5 | LFE5UM5G-85F | 75MHz | FTDI | 16-bit 512MB DDR3 | No | 1Gbps RGMII | 16MB QSPI | Yes* |
+| Fomu | Lattice iCE40 | iCE40-UP5K | 12MHz | USB | 128KB SPRAM | No | No | 16MB QSPI | No |
+| HADBadge | Lattice ECP5 | LFE5U-45F | 48MHz | IOs | 8-bit 32MB SDR | No | No | 16MB QSPI | No |
+| iCEBreaker | Lattice iCE40 | iCE40-UP5K | 24MHz | FTDI | 128KB SPRAM | No | No | ? | No |
+| LogicBone | Lattice ECP5 | LFE5U-45F | 75MHz | FTDI | 16-bit 1GB DDR3 | No | 1Gbps RGMII | ? | ? |
+| MarbleMini | Xilinx Artix7 | XC7A100T | 100MHz | ? | ? | No | 1Gbps RGMII | ? | ? |
+| MiniSpartan6 | Xilinx Spartan6 | XC6SLX25 | 80MHz | FTDI | 16-bit 32MB SDR | No | No | 8MB QSPI | Yes |
+| NeTV2 | Xilinx Artix7 | XC7A35T | 100MHz | IOs | 32-bit 512MB DDR3 | Gen2 X4 | 100Mbps RMII | 16MB QSPI | Yes |
+| OrangeCrab | Lattice ECP5 | LFE5U-25F | 48MHz | USB | 16-bit 128MB SDR | No | No | 4MB QSPI | Yes |
+| Pipistrello | Xilinx Spartan6 | XC6SLX45 | 83MHz | FTDI | 16-bit 64MB LPDDR | No | No | 16MB QSPI | Yes* |
+| ULX3S | Lattice ECP5 | LFE5U-45F | 50MHz | FTDI | 16-bit 32MB SDR | No | No | 4MB QSPI | Yes |
+| TrellisBoard | Lattice ECP5 | LFE5UM5G-85F | 75MHz | FTDI | 32-bit 1GB DDR3 | Gen2 X1* | 1Gbps RGMII* | 16MB QSPI | Yes |
+| TinyFPGA | Lattice iCE40 | iCE40-LP8K | 16MHz | IOs | No | No | No | 16MB QSPI | No |
+
+* Present on the board but not yet supported or validated with LiteX.
+
+[> Accelerator boards
+---------------------
+
+PCIe accelerators boards you could use to accelerate your applications, LiteX provides you the essential cores for it: LitePCIe and LiteDRAM along with the LiteX infrastructure to create a design and easily control it/debug it.
+
+| Name | FPGA Family | FPGA device | Sys-Clk | TTY | DRAM | PCIe | Flash |
+|----------------|---------------------|---------------|----------|------|-----------------------|---------------|-------------|
+| AcornCLE215+ | Xilinx Artix7 | XC7A200T | 125MHz | PCIe | 16-bit 1GB DDR3 | Gen2 X4 | ? |
+| ForestKitten33 | Xilinx Ultrascale+ | XCVU33P | 125MHz | PCIe | 2 x 1024-bit 4GB HBM2*| Gen3 X16** | ? |
+| BCU1525 | Xilinx Ultrascale+ | XCVU9P | 125MHz | PCIe | 4 x 64-bit DDR4 DIMM* | Gen3 X16** | ? |
+| AlveoU250 | Xilinx Ultrascale+ | XCU250 | 125MHz | PCIe | 4 x 64-bit DDR4 DIMM* | Gen2 X16** | ? |
+
+* Present on the board but not yet supported or validated with LiteX.
+** Currently limited to PCIe Gen2 X4 by LitePCIe.
+
+[> Repurposed hardware
+----------------------
+
+Repurposed FPGA hardware that has been "documented" by enthusiats :), allows you to discover FPGAs for very cheap (15$)!
+
+| Name | FPGA Family | FPGA device | Sys-Clk | TTY | DRAM | Ethernet | Flash |
+|--------------|---------------------|---------------|----------|------|--------------------|--------------------|-------------|
+| Colorlight5A | Lattice ECP5 | LFE5U-25F | 60MHz | IOs | 32-bit 8MB SDR | 2x 1Gbps RGMII | ? |
+| Linsn RV901 | Xilinx Spartan6 | XC6SLX16 | 75MHz | IOs | 32-bit 8MB SDR | 2x 1Gbps RGMII | ? |
+| PanoLogic G2 | Xilinx Spartan6 | XC6SLX100-150 | 50MHz | IOs | 32-bit 128MB DDR2 | 1Gbps GMII | ? |
+| Camlink-4K | Lattice ECP5 | LFE5U-25F | 81MHz | IOs | 16-bit 128MB DDR3 | No | ? |
+
+The Colorlight5A is a very nice board to start with, cheap, powerful, easy to use with the open-source toolchain, you can find a specific LiteX project [here](https://github.com/enjoy-digital/colorlite)
+
+* Present on the board but not yet supported or validated with LiteX.
+
+[> Development boards
+---------------------
+
+| Name | FPGA Family | FPGA device | Sys-Clk | TTY | RAM | PCIe | Ethernet | Flash | SDCard |
+|--------------|---------------------|---------------|---------|------|--------------------|-----------|----------------|-------------|--------|
+| AC701 | Xilinx Artix7 | XC7A200T | 100MHz | FTDI | 64-bit ?MB DDR3 | Gen2 X4 | 1Gbps RGMII | ? | ? |
+| Aller | Xilinx Artix7 | XC7A200T | 100MHz | PCIe | 16-bit ?MB DDR3 | Gen2 X4 | No | ? | ? |
+| Arty(A7) | Xilinx Artix7 | XC7A35T | 100MHz | FTDI | 16-bit 256MB DDR3 | No | 100Mbps MII | 16MB QSPI | No |
+| ArtyS7 | Xilinx Spartan7 | XC7S50 | 100MHz | FTDI | 16-bit 256MB DDR3 | No | No | 16MB QSPI | No |
+| Avalanche | Microsemi PolarFire | MPF300TS | 100MHz | IOs | 16-bit 256MB DDR3 | No | 1Gbps RGMII* | 8MB QSPI* | No |
+| C10LPRefKit | Intel Cyclone10 | 10CL055 | ? | ? | 16-bit ?MB SDR | No | ? | ? | ? |
+| De0Nano | Intel Cyclone4 | EP4CE22F | 50MHz | FTDI | 16-bit 32MB SDR | No | No | No | No |
+| De10Lite | Intel MAX10 | 10M50DA | 50MHz | IOs | 16-bit 64MB SDR | No | No | No | No |
+| De10Nano | Intel Cyclone5 | 5CSEBA6 | 50MHz | IOs | 16-bit 32MB SDR | No | No | No | Yes |
+| De1SoC | Intel Cyclone5 | 5CSEMA5 | ? | ? | | No | ? | ? | ? |
+| De2-115 | Intel Cyclone4 | EP4CE115 | ? | ? | | No | ? | ? | ? |
+| ECP5-EVN | Lattice ECP5 | LFE5UM5G-85F | ? | ? | | No | ? | ? | ? |
+| Genesys2 | Xilinx Kintex7 | XC7K325T | 125MHz | FTDI | 32-bit 1GB DDR3 | No | 1Gbps RGMII* | 32MB QSPI* | Yes |
+| KC705 | Xilinx Kintex7 | XC7K325T | 125MHz | FTDI | 64-bit 1GB DDR3 | Gen2 X8** | 1Gbps GMII | 32MB QSPI* | Yes |
+| KCU105 | Xilinx KintexU | XCKU40 | 125MHz | FTDI | 64-bit 1GB DDR4 | Gen3 X8** | 1Gbps-BASE-X | 64MB QSPI* | Yes |
+| KX2 | Xilinx Kintex7 | XC7K160T | ? | ? | ? | ? | ? | ? | ? |
+| MachXO3 | Lattice MachXO3 | LCMXO3L-6900C | ? | ? | ? | No | ? | ? | ? |
+| Mercury XU5 | Xilinx ZynqU+ | XCZU2EG | ? | ? | ? | ? | ? | ? | ? |
+| Mimas A7 | Xilinx Artix7 | XC7A50T | ? | ? | ? | No | 1Gbps RGMII | ? | ? |
+| Nereid | Xilinx Kintex7 | XC7K160T | ? | ? | ? | ? | ? | ? | ? |
+| Nexys4DDR | Xilinx Artix7 | XC7A100T | 100MHz | FTDI | 16-bit 128MB DDR2 | No | 100Mbps RMII | 16MB QSPI* | Yes |
+| Nexys Video | Xilinx Artix7 | XC7A200T | 100MHz | FTDI | 16-bit 512MB DDR3 | No | 1Gbps RMII* | 32MB QSPI* | Yes |
+| SP605 | Xilinx Spartan6 | ? | ? | ? | ? | ? | ? | ? | ? |
+| Tagus | Xilinx Artix7 | XC7A200T | ? | ? | ? | ? | ? | ? | ? |
+| VC707 | Xilinx Virex7 | XC7VX485T | ? | FTDI | ? | ? | ? | ? | ? |
+| VCU118 | Xilinx VirtexU+ | XCVU9P | ? | FTDI | ? | ? | ? | ? | ? |
+| Versa ECP5 | Lattice ECP5 | LFE5UM5G-45F | 75MHz | FTDI | 16-bit 128MB DDR3 | Gen1 X1* | 1Gbps RGMII | 16MB QSPI* | No |
+| ZCU104 | Xilinx ZynqU+ | XCZU7EV | 125MHz | FTDI | 64-bit 1GB DDR4 | No | 1Gbps RGMII* | 64MB QSPI* | Yes* |
+| Zybo Z7 | Xilinx ZynqU+ | XC7Z010 | 125MHz | FTDI | 64-bit 1GB DDR4 | No | 1Gbps RGMII* | 64MB QSPI* | Yes* |
+
+* Present on the board but not yet supported or validated with LiteX.
+** Currently limited to PCIe Gen2 X4 by LitePCIe.
+