crosslink_nx_evn: Improve documentation on UART jumpers

Signed-off-by: David Shah <dave@ds0.me>
This commit is contained in:
David Shah 2020-09-05 09:58:28 +01:00
parent 76ac4a69a8
commit 8a9fd02768
2 changed files with 3 additions and 2 deletions

View file

@ -25,7 +25,8 @@ _io = [
("user_btn", 1, Pins("G15"), IOStandard("LVCMOS33")), # SW3 ("user_btn", 1, Pins("G15"), IOStandard("LVCMOS33")), # SW3
# Section 6.2 UART Topology # Section 6.2 UART Topology
# Requires installation of 0-ohm jumpers to properly route signals # Requires installation of 0-ohm jumpers R15 and R17 to properly route signals
# Note that it is R15 and R17, not R16 and R17 as stated in the user guide
("serial", 0, ("serial", 0,
Subsignal("rx", Pins("F16"), IOStandard("LVCMOS33")), Subsignal("rx", Pins("F16"), IOStandard("LVCMOS33")),
Subsignal("tx", Pins("F18"), IOStandard("LVCMOS33")), Subsignal("tx", Pins("F18"), IOStandard("LVCMOS33")),

View file

@ -99,7 +99,7 @@ def main():
parser.add_argument("--build", action="store_true", help="Build bitstream") parser.add_argument("--build", action="store_true", help="Build bitstream")
parser.add_argument("--load", action="store_true", help="Load bitstream") parser.add_argument("--load", action="store_true", help="Load bitstream")
parser.add_argument("--sys-clk-freq", default=75e6, help="System clock frequency (default=75MHz)") parser.add_argument("--sys-clk-freq", default=75e6, help="System clock frequency (default=75MHz)")
parser.add_argument("--serial", default="serial", help="UART Pins: serial or serial_pmod[0-2] (default=serial)") parser.add_argument("--serial", default="serial", help="UART Pins: serial (requires R15 and R17 to be soldered) or serial_pmod[0-2] (default=serial)")
parser.add_argument("--prog-target", default="direct", help="Programming Target: direct or flash") parser.add_argument("--prog-target", default="direct", help="Programming Target: direct or flash")
builder_args(parser) builder_args(parser)
soc_core_args(parser) soc_core_args(parser)