betrusted-ed25519-verified/verification/selftest-axgate.sh
mrwulf a69a08cde6 verification: --audit-only mode, and the guard that keeps it from becoming evidence (T1)
Gate work dominates this estate's wall-clock: on 2026-07-29, 3.9 hours of a
session went to Lean re-elaborating proofs nobody had edited while the audit
phases themselves took about fifteen seconds. --audit-only runs every gate
against the artifacts a previous full run left behind: ~60s against ~1280s.

IT IS SAFE ONLY BECAUSE IT REFUSES.

  - It requires every shipped .lean to be BYTE-IDENTICAL to a basis recorded by
    a previous full run. Not mtimes: `touch` defeats those, and a stale-artifact
    check that fails open is worse than no shortcut at all, because a green
    button would then describe a corpus that is no longer on disk.
  - The basis is gitignored build state, so a fresh clone cannot inherit
    permission to skip compiling.
  - The closing banner differs and says in words that the run is not evidence.

selftest-auditonly.sh exercises seven cases: no basis, an edited comment
character, a deleted source, a new source, a missing artifact, a truncated
basis, and — asserted as a PASS — every source's mtime touched with bytes
unchanged, which pins the bytes-not-mtimes decision rather than leaving it
implicit. Negative-tested: with the basis comparison disabled a changed source
is wrongly accepted, exit 0 and zero refusals, so the guard is load-bearing.

A PHASE TERMINATOR, because this broke twice. Every self-test lifts a phase
from check.sh by scanning to the next phase marker. The last phase had no
marker after it, so a lift ran to end-of-file and swallowed whatever was
appended later — first Phase 2c into the axgate lift, then T1's tail into the
binding lift, where it referenced $AUDIT_ONLY and died under `set -u`. Both
surfaced as the BASELINE case failing: a self-test blaming a gate for its own
extraction bug. The phases now end at an explicit sentinel and both lifters
stop there, so nothing appended below can silently become part of the last
phase from a lifter's point of view.

TRUSTED-BASE.md records what an audit-only transcript does and does not
establish, and — because it cost a confusing red run today — that lean-guard's
memory clamp presents as `FAIL: Proofs/<module>` while being a resource
condition, not a broken proof.

Verified green: 8 full button runs (four check.sh, four check-scalar.sh) and 20
self-tests across the four repositories, zero red. One earlier run failed on
the memory clamp because the author ran a test suite concurrently; re-run on a
quiet machine, green.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-30 19:16:21 +02:00

146 lines
6.7 KiB
Bash
Executable file

#!/usr/bin/env bash
# ─────────────────────────────────────────────────────────────────────────────
# selftest-axgate.sh — adversarial self-test for check.sh Phase 2b.
#
# An untested guard is decoration. This script breaks the thing Phase 2b
# guards and asserts the gate goes red FOR THE STATED REASON — a rejection by
# some other gate, or with some other message, fails the test too.
#
# It extracts Phase 2b out of check.sh at run time, so it attacks THE SHIPPING
# GATE rather than a copy that can drift away from it.
#
# Requires: Proofs/*.olean already built (run check.sh first, or any prior
# green build). Takes ~10 s; compiles one tiny throwaway module.
# ─────────────────────────────────────────────────────────────────────────────
set -uo pipefail
source ~/aeneas-toolchain/env.sh
HERE="$(cd "$(dirname "$0")" && pwd)"
AENEAS_LEAN="$AENEAS_HOME/backends/lean"
TIMEOUT="${LEAN_TIMEOUT:-600}"
export LEAN_MEM_MB="${LEAN_MEM_MB:-8192}"
CORES="${LEAN_MAX_CORES:-0-3}"
ATTACK="$HERE/Proofs/ZZSelftestAttack.lean"
STASH="$(mktemp -d)"
FAILURES=0
# Recorded before anything is touched, so the restore check compares against
# reality rather than assuming a pristine checkout.
TREE_AT_START="$(cd "$(dirname "$0")/.." && git status --porcelain -- verification/Proofs)"
cleanup() {
rm -f "$ATTACK" "${ATTACK%.lean}.olean"
[ -f "$STASH/FeQ.olean" ] && mv "$STASH/FeQ.olean" "$HERE/Proofs/FeQ.olean"
rm -rf "$STASH"
rm -f "$HERE"/.axgate-*.lean "$HERE"/.axgate-*.olean
}
trap cleanup EXIT INT TERM
# Phase 2b, lifted verbatim from the shipping button.
DRIVER="$STASH/phase2b.sh"
{
echo 'set -euo pipefail'
echo 'source ~/aeneas-toolchain/env.sh'
echo "HERE=\"$HERE\""
echo 'AENEAS_LEAN="$AENEAS_HOME/backends/lean"'
echo "TIMEOUT=$TIMEOUT; CORES=\"$CORES\""
# Stop at the NEXT phase marker, whatever it is called. A hardcoded
# terminator ("...to Phase 3") silently widens the moment a phase is
# inserted between the two: adding Phase 2c made this driver swallow 2c as
# well and die on variables that phase expects check.sh to have defined,
# which surfaced as the BASELINE failing — a self-test blaming a gate for
# its own extraction bug.
awk '/^# ── Phase 2b/{f=1} f&&/^# ── (Phase |Phases end)/&&!/Phase 2b/{exit} f{print}' "$HERE/check.sh"
} > "$DRIVER"
if [ "$(wc -l < "$DRIVER")" -lt 40 ]; then
echo "FATAL: could not lift Phase 2b out of check.sh — the phase markers moved."
echo "This self-test must attack the shipping gate; refusing to run against nothing."
exit 1
fi
if [ "$(grep -c '^# ── Phase ' "$DRIVER")" -ne 1 ]; then
echo "FATAL: the lifted block spans more than one phase; the extraction is wrong."
grep '^# ── Phase ' "$DRIVER" | sed 's/^/ /'
exit 1
fi
expect() { # expect <name> <expected-rc> <required-substring>
local name="$1" want_rc="$2" want_txt="$3"
local out rc
out=$(bash "$DRIVER" 2>&1); rc=$?
if [ "$rc" -ne "$want_rc" ]; then
echo " FAIL $name: exit $rc, expected $want_rc"; FAILURES=$((FAILURES+1)); return
fi
if ! grep -qF "$want_txt" <<<"$out"; then
echo " FAIL $name: exit code right but diagnostic wrong (rejected for the wrong reason)"
echo " wanted substring: $want_txt"
echo " got: $(tr '\n' '|' <<<"$out" | cut -c1-300)"
FAILURES=$((FAILURES+1)); return
fi
echo " ok $name"
}
echo "=== selftest-axgate: attacking check.sh Phase 2b ==="
# ── 1. Baseline: the untouched repo must pass, and say how much it covered.
expect "baseline green, coverage reported" 0 "none is an axiom"
# ── 2. The attack Phase 1's grep cannot see: an indented top-level axiom.
# Lean accepts it; the repo then proves False; the source-text gate is blind.
cat > "$ATTACK" <<'EOF'
namespace ZZSelftestAttack
axiom cheat : ∀ (P : Prop), P
theorem repo_proves_false : False := cheat _
end ZZSelftestAttack
EOF
if grep -rnE '^(private |protected |noncomputable )*axiom ' "$HERE"/Proofs/*.lean >/dev/null 2>&1; then
echo " FAIL premise: Phase 1's grep sees the attack — this test no longer tests what it claims"
FAILURES=$((FAILURES+1))
else
echo " ok premise: Phase 1's source-text grep is blind to this attack"
fi
(cd "$AENEAS_LEAN" && lake env bash -c "
set -euo pipefail
cd '$HERE/gen' && export LEAN_PATH=\"\$LEAN_PATH:\$PWD:$HERE\"
cd '$HERE'
LEAN_TIMEOUT=$TIMEOUT LEAN_MAX_CORES=$CORES '$HERE/lean-guard' 'Proofs/ZZSelftestAttack.lean'
") >/dev/null 2>&1 || { echo " FAIL setup: the attack module did not compile"; FAILURES=$((FAILURES+1)); }
expect "indented axiom caught kernel-side" 1 "AXIOM DECLARED under Proofs/"
rm -f "$ATTACK" "${ATTACK%.lean}.olean"
# ── 3. Vacuity: delete a compiled module. "Nothing found" must not pass for
# "nothing wrong" — the gate has to notice it stopped covering something.
mv "$HERE/Proofs/FeQ.olean" "$STASH/FeQ.olean"
expect "missing .olean is a failure, not a vacuous pass" 1 "COVERAGE MISMATCH"
mv "$STASH/FeQ.olean" "$HERE/Proofs/FeQ.olean"
# ── 4. Litter: neither path may leave the temp gate source or its artifact
# behind (this repo accumulated 101 orphan .olean files exactly that way).
if ls "$HERE"/.axgate-* >/dev/null 2>&1; then
echo " FAIL litter: temp gate files survived a run"; FAILURES=$((FAILURES+1))
else
echo " ok no litter left by either the green or the red path"
fi
# ── 5. Restored: the self-test must leave the working tree exactly as it found
# it. Compared against the state recorded at START, not against a pristine
# checkout — files can be legitimately uncommitted while work is in flight,
# and a test that assumes otherwise reports its own premise as a failure.
# Compare the two states AS STRINGS. Comparing `echo "$VAR"` against a raw
# command substitution is asymmetric: for a clean tree the variable is empty
# and `echo` still emits one blank line while the command emits none, so the
# check reports a spurious difference exactly when nothing is wrong.
TREE_NOW="$(cd "$HERE/.." && git status --porcelain -- verification/Proofs)"
if [ "$TREE_AT_START" != "$TREE_NOW" ]; then
echo " FAIL restore: Proofs/ differs from how this test found it:"
diff <(printf '%s\n' "$TREE_AT_START") <(printf '%s\n' "$TREE_NOW") | sed 's/^/ /'
FAILURES=$((FAILURES+1))
else
echo " ok working tree restored to its starting state"
fi
echo ""
if [ "$FAILURES" -eq 0 ]; then
echo "SELFTEST PASSED — Phase 2b rejects what it claims to reject, for the stated reason."
exit 0
fi
echo "SELFTEST FAILED: $FAILURES check(s) did not behave as claimed."
exit 1