finish u32e_backend variant for bootloader use

Cargo.toml

@@ -81,7 +81,7 @@ std = ["alloc", "subtle/std", "rand_core/std"]
 alloc = ["zeroize/alloc"]
 
 # The u32 backend uses u32s with u64 products.
-u32_backend = ["utralib"]
+u32_backend = []
 # The u32e backend uses u32s with u64 products + field25519 accelerator.
 u32e_backend = ["engine25519-as", "utralib"]
 # The u64 backend uses u64s with u128 products.

src/backend/serial/u32/field.rs

@@ -27,9 +27,6 @@ use subtle::ConditionallySelectable;
 
 use zeroize::Zeroize;
 
-#[macro_use]
-use debug;
-
 /// A `FieldElement2625` represents an element of the field
 /// \\( \mathbb Z / (2\^{255} - 19)\\).
 ///
@@ -218,9 +215,7 @@ impl<'a, 'b> Mul<&'b FieldElement2625> for &'a FieldElement2625 {
         //
         // So z[0] fits into a u64 if 51 + 2*b + lg(249) < 64
         //                         if b < 2.5.
-        let ret = FieldElement2625::reduce([z0, z1, z2, z3, z4, z5, z6, z7, z8, z9]);
+        FieldElement2625::reduce([z0, z1, z2, z3, z4, z5, z6, z7, z8, z9])
-        //println!("a:{:?}\n\rb:{:?}\n\rout:{:?}", self.to_bytes(), _rhs.to_bytes(), ret.to_bytes());
-        ret
     }
 }
 

src/backend/serial/u32e/field.rs

@@ -16,7 +16,6 @@
 //! implementation, and was then rewritten to use unsigned limbs instead
 //! of signed limbs.
 
-use core::fmt::Debug;
 use core::ops::Neg;
 use core::ops::{Add, AddAssign};
 use core::ops::{Mul, MulAssign};
@@ -50,17 +49,10 @@ use zeroize::Zeroize;
 /// The backend-specific type `Engine25519` should not be used
 /// outside of the `curve25519_dalek::field` module.
 
-//#[macro_use]
-//mod debug;
-
-#[macro_use]
-use debug;
-
 #[derive(Copy, Clone, Debug)]
 pub struct Engine25519(
     pub (crate) [u8; 32]
 );
-#[derive(Debug)]
 pub(crate) enum EngineOp {
     Mul,
     Add,
@@ -68,7 +60,6 @@ pub(crate) enum EngineOp {
 }
 
 pub(crate) fn engine(a: &[u8; 32], b: &[u8; 32], op: EngineOp) -> Engine25519 {
-    use core::convert::TryInto;
     use utralib::generated::*;
     let mut engine = utralib::CSR::new(utra::engine::HW_ENGINE_BASE as *mut u32);
     let mcode: &'static mut [u32] = unsafe{ core::slice::from_raw_parts_mut(utralib::HW_ENGINE_MEM as *mut u32, 1024) };
@@ -121,12 +112,17 @@ pub(crate) fn engine(a: &[u8; 32], b: &[u8; 32], op: EngineOp) -> Engine25519 {
     }
     // copy a arg
     for (src, dst) in a.chunks_exact(4).zip(rf[0].iter_mut()) {
-        unsafe{ (dst as *mut u32).write_volatile(u32::from_le_bytes(src[0..4].try_into().unwrap()));}
+        let bytes: [u8; 4] = [src[0], src[1], src[2], src[3]];
+        unsafe{ (dst as *mut u32).write_volatile(u32::from_le_bytes(bytes));}
+        /* this is a bad idea: src[0..4].try_into().unwrap()
+           because "unwrap()" adds in a whole bunch of string formatting stuff, adds +16k or so to the binary size
+        */
     }
 
     // copy b arg
     for (src, dst) in b.chunks_exact(4).zip(rf[1].iter_mut()) {
-        unsafe{ (dst as *mut u32).write_volatile(u32::from_le_bytes(src[0..4].try_into().unwrap()));}
+        let bytes: [u8; 4] = [src[0], src[1], src[2], src[3]];
+        unsafe{ (dst as *mut u32).write_volatile(u32::from_le_bytes(bytes));}
     }
 
     engine.wfo(utra::engine::CONTROL_GO, 1);
@@ -192,7 +188,6 @@ impl<'a, 'b> Mul<&'b Engine25519> for &'a Engine25519 {
     type Output = Engine25519;
     fn mul(self, _rhs: &'b Engine25519) -> Engine25519 {
         let ret = engine(&self.0, &_rhs.0, EngineOp::Mul);
-        //println!("a:{:?}\n\rb:{:?}\n\rout:{:?}", self.0, _rhs.0, ret.0);
         ret
     }
 }

src/backend/serial/u32e/scalar.rs

@@ -10,7 +10,6 @@
 //! -0x1ffffffe00000008 (62 bits with sign bit) to
 //! 0x43fffffbc0000011 (63 bits), which is still safe.
 
-use core::fmt::Debug;
 use core::ops::{Index, IndexMut};
 
 use zeroize::Zeroize;

src/debug.rs

@@ -1,104 +0,0 @@
-use utralib::generated::*;
-pub struct Uart {
-    // pub base: *mut u32,
-}
-
-impl Uart {
-    fn put_digit(&mut self, d: u8) {
-        let nyb = d & 0xF;
-        if nyb < 10 {
-            self.putc(nyb + 0x30);
-        } else {
-            self.putc(nyb + 0x61 - 10);
-        }
-    }
-    pub fn put_hex(&mut self, c: u8) {
-        self.put_digit(c >> 4);
-        self.put_digit(c & 0xF);
-    }
-    pub fn newline(&mut self) {
-        self.putc(0xa);
-        self.putc(0xd);
-    }
-    pub fn print_hex_word(&mut self, word: u32) {
-        for &byte in word.to_be_bytes().iter() {
-            self.put_hex(byte);
-        }
-    }
-
-    pub fn putc(&self, c: u8) {
-        let base = utra::uart::HW_UART_BASE as *mut u32;
-        let mut uart = CSR::new(base);
-        // Wait until TXFULL is `0`
-        while uart.r(utra::uart::TXFULL) != 0 {}
-        uart.wo(utra::uart::RXTX, c as u32)
-    }
-
-    pub fn getc(&self) -> Option<u8> {
-        let base = utra::uart::HW_UART_BASE as *mut u32;
-        let mut uart = CSR::new(base);
-        match uart.rf(utra::uart::EV_PENDING_RX) {
-            0 => None,
-            ack => {
-                let c = Some(uart.rf(utra::uart::RXTX_RXTX) as u8);
-                uart.wfo(utra::uart::EV_PENDING_RX, ack);
-                c
-            }
-        }
-    }
-
-    pub fn tiny_write_str(&mut self, s: &str) {
-        for c in s.bytes() {
-            self.putc(c);
-        }
-    }
-
-}
-
-use core::fmt::{Error, Write};
-impl Write for Uart {
-    fn write_str(&mut self, s: &str) -> Result<(), Error> {
-        for c in s.bytes() {
-            self.putc(c);
-        }
-        Ok(())
-    }
-}
-
-#[macro_use]
-pub mod debug_print_hardware {
-    #[macro_export]
-    macro_rules! print
-    {
-        ($($args:tt)+) => ({
-                use core::fmt::Write;
-                let _ = write!(debug::Uart {}, $($args)+);
-        });
-    }
-}
-
-#[macro_use]
-#[cfg(test)]
-mod debug_print_hardware {
-    #[macro_export]
-    #[allow(unused_variables)]
-    macro_rules! print {
-        ($($args:tt)+) => ({
-            std::print!($($args)+)
-        });
-    }
-}
-
-#[macro_export]
-macro_rules! println
-{
-    () => ({
-        $crate::print!("\r\n")
-    });
-    ($fmt:expr) => ({
-        $crate::print!(concat!($fmt, "\r\n"))
-    });
-    ($fmt:expr, $($args:tt)+) => ({
-        $crate::print!(concat!($fmt, "\r\n"), $($args)+)
-    });
-}

src/edwards.rs

@@ -172,9 +172,6 @@ impl Debug for CompressedEdwardsY {
     }
 }
 
-#[macro_use]
-use debug;
-
 impl CompressedEdwardsY {
     /// View this `CompressedEdwardsY` as an array of bytes.
     pub fn as_bytes(&self) -> &[u8; 32] {
@@ -191,36 +188,21 @@ impl CompressedEdwardsY {
     /// Returns `None` if the input is not the \\(y\\)-coordinate of a
     /// curve point.
     pub fn decompress(&self) -> Option<EdwardsPoint> {
-        println!("self.bytes: {:?}", self.as_bytes());
         let Y = FieldElement::from_bytes(self.as_bytes());
-        println!("Y: {:?}", Y.to_bytes());
         let Z = FieldElement::one();
-        println!("Z: {:?}", Z.to_bytes());
         let YY = Y.square();
-        println!("YY: {:?}", YY.to_bytes());
         let u = &YY - &Z;                            // u =  y²-1
-        println!("u: {:?}", u.to_bytes());
         let v = &(&YY * &constants::EDWARDS_D) + &Z; // v = dy²+1
-        println!("v: {:?}", v.to_bytes());
         let (is_valid_y_coord, mut X) = FieldElement::sqrt_ratio_i(&u, &v);
-        println!("isvalid: {:?}", is_valid_y_coord);
-        println!("X: {:?}", X.to_bytes());
 
         if is_valid_y_coord.unwrap_u8() != 1u8 { return None; }
 
-        println!("valid");
          // FieldElement::sqrt_ratio_i always returns the nonnegative square root,
          // so we negate according to the supplied sign bit.
         let compressed_sign_bit = Choice::from(self.as_bytes()[31] >> 7);
         X.conditional_negate(compressed_sign_bit);
-        println!("negate");
 
-        println!("X: {:?}", X.to_bytes());
+        Some(EdwardsPoint{ X, Y, Z, T: &X * &Y })
-        println!("Y: {:?}", Y.to_bytes());
-        println!("Z: {:?}", Z.to_bytes());
-        let t = &X * &Y;
-        println!("T: {:?}", t.to_bytes());
-        Some(EdwardsPoint{ X, Y, Z, T: t })
     }
 }
 

src/field.rs

@@ -94,8 +94,6 @@ impl ConstantTimeEq for FieldElement {
         self.to_bytes().ct_eq(&other.to_bytes())
     }
 }
-#[macro_use]
-use debug;
 
 impl FieldElement {
     /// Determine if this `FieldElement` is negative, in the sense
@@ -264,41 +262,25 @@ impl FieldElement {
         // If v is zero, r is also zero.
 
         let v3 = &v.square()  * v;
-        println!("v3: {:?}", v3.to_bytes());
         let v7 = &v3.square() * v;
-        println!("v7: {:?}", v7.to_bytes());
         let mut r = &(u * &v3) * &(u * &v7).pow_p58();
-        println!("r: {:?}", r.to_bytes());
         let check = v * &r.square();
-        println!("check: {:?}", check.to_bytes());
 
         let i = &constants::SQRT_M1;
-        println!("i: {:?}", i.to_bytes());
 
         let correct_sign_sqrt   = check.ct_eq(        u);
         let flipped_sign_sqrt   = check.ct_eq(     &(-u));
         let flipped_sign_sqrt_i = check.ct_eq(&(&(-u)*i));
-        println!("correct_sign_sqrt: {:?}", correct_sign_sqrt);
-        println!("u: {:?}", u.to_bytes());
-        println!("flipped_sign_sqrt: {:?}", flipped_sign_sqrt);
-        println!("-u: {:?}", &(-u).to_bytes());
-        println!("flipped_sign_sqrt_i: {:?}", flipped_sign_sqrt_i);
-        println!("-u * i: {:?}", &(&(-u)*i));
 
         let r_prime = &constants::SQRT_M1 * &r;
-        println!("r_prime: {:?}", r_prime.to_bytes());
         r.conditional_assign(&r_prime, flipped_sign_sqrt | flipped_sign_sqrt_i);
-        println!("r_assign1: {:?}", r.to_bytes());
-
 
         // Choose the nonnegative square root.
         let r_is_negative = r.is_negative();
         r.conditional_negate(r_is_negative);
-        println!("r_assign2: {:?}", r.to_bytes());
 
         let was_nonzero_square = correct_sign_sqrt | flipped_sign_sqrt;
 
-        println!("final r: {:?}", r.to_bytes());
         (was_nonzero_square, r)
     }
 

src/lib.rs

@@ -73,13 +73,9 @@ extern crate engine25519_as;
 #[cfg(feature = "betrusted")]
 extern crate engine_25519;
 
-//#[cfg(feature = "u32e_backend")]
+#[cfg(feature = "u32e_backend")]
 extern crate utralib;
 
-//#[cfg(feature = "u32e_backend")]
-#[macro_use]
-mod debug;
-
 //------------------------------------------------------------------------
 // curve25519-dalek public modules
 //------------------------------------------------------------------------

src/ristretto.rs

@@ -194,7 +194,7 @@ use traits::{MultiscalarMul, VartimeMultiscalarMul, VartimePrecomputedMultiscala
     feature = "simd_backend",
     any(target_feature = "avx2", target_feature = "avx512ifma")
 )))]
-#[cfg(not(feature = "betrusted"))]
+#[cfg(all(not(feature = "betrusted"), not(feature = "u32e_backend")))]
 use backend::serial::scalar_mul;
 #[cfg(all(
     feature = "simd_backend",

src/scalar.rs

@@ -1018,7 +1018,7 @@ impl Scalar {
 
     /// Returns a size hint indicating how many entries of the return
     /// value of `to_radix_2w` are nonzero.
-    #[cfg(not(feature = "betrusted"))]
+    #[cfg(all(not(feature = "betrusted"), not(feature = "u32e_backend")))]
     pub(crate) fn to_radix_2w_size_hint(w: usize) -> usize {
         debug_assert!(w >= 4);
         debug_assert!(w <= 8);